EPSON GT-7000
Chapter 4
Disassembly and Assembly
Rev. A
40
4.2.6 Carriage Motor/Timing Belt Removal
1. Release the carriage lock. (See section 4.2.1)
2. Remove the document cover.(See section 4.2.2)
3. Remove the upper cover. (See section 4.2.3)
4. Remove the carriage unit. (See section 4.2.5)
5. Remove 2 gold screws(CBS, 3x8) and 2 rear hooks, and remove
the shield board for the main board.
6. Remove 2 gold screws(CBS, 3x4) fixing the CR motor unit, and
slide the CR motor unit into the inside of the scanner body.
Figure 4-20. Shield Board Removal
Figure 4-21. CR Motor Unit Removal(1)
C B S ( M 3 x 5 )
S h i e l d B o a r d f o r M a i n B o a r d
F o o k s
C B S ( M 3 x 4 )
C R M o t o r U n i t
Summary of Contents for GT-7000 Photo
