Epson GT-30000 Series Setup Manual Download

Page: 90 / 140

4-6

Using Your Scanner

R4C3820
Rev. C

A5 size

USING.FM

4/9/01

Pass 0

Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee

4. Start your scanner software, and follow scanning instructions

described later in this chapter or your

Online Reference Guide

Note:

❏

Make sure the document is flat against the glass surface, otherwise the
image will appear fuzzy and out of focus. Also be sure to close the
Automatic Document Feeder to prevent interference from external
light.

❏

Opening the Automatic Document Feeder while scanning is in
progress will result in an option error and may result in a paper feeding
error.

❏

Always close the Automatic Document Feeder and the middle cover
before scanning or using the feeder.

❏

Always keep the document table clean. See “Maintenance and
Troubleshooting” in your Online Reference Guide.

❏

Do not leave photographs on the document table for an extended period
of time as they may stick to the glass.

❏

Do not place heavy objects on top of the scanner.

Summary of Contents for GT-30000 Series













































































































































Search results

Summary of Contents for GT-30000 Series

Reviews:

Related manuals for GT-30000 Series

Brands by name

Popular brands

Epson GT-30000 Series, Setup Manual

Search results

Summary of Contents for GT-30000 Series

Reviews:

Related manuals for GT-30000 Series

Brands by name

Popular brands