Network Scanning
85
8. Follow the instructions on the screen to
install EPSON Scan Server. When you
see the window on the right, make sure
GT-10000
is selected under Scanner
Selection.
Select either
Icon
or
Dialogbox
as the
scanner server start up mode. (See
“Changing the Scanner Server Start Up
Mode” below for details about the start up
mode.)
9. Click
Test
to test scanner operation.
OK. Scanner available
appears under
Status if the scanner is communicating
with the scanner server. Click
OK
to close
the window.
If you want to share a different network scanner with the client
computers, you can access the EPSON Scan Server window at any time
by double-clicking the EPSON Scan Server icon in the Windows Control
Panel. Then select the scanner you want in the Scanner Selection list.
10. Follow the instructions on the screen to complete installation of any other
software you’ve selected in the EPSON Software Setup window. If you’re done
installing software, restart your computer.
If you want to install PhotoDeluxe, see page 45 for instructions.
Changing the Scanner Server Start Up Mode
You can set up the scanner server to start in either Dialog Box or Icon mode.
In Dialog Box mode, the
window below appears
whenever you start
EPSON Scan Server.
click here and
select Taskbar
Icon to switch
to Icon mode
Summary of Contents for G650B
Page 1: ...Color Scanner User s Guide ...
Page 8: ...viii Contents ...
Page 85: ...Scanning With the ISIS Driver 77 ...
