manualshive.com logo in svg

Epson FX 890, Reference Manual

Share
Download
Epson FX 890 Reference Manual Download Page 66

60

Paper Handling

R4CC530
long.bk

Rev. E

A5 size

PAPER.fm

6/23/03

L

Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson

❏

Use postcards under the following temperature and humidity 
conditions:

❏

When loading A6 size cards, always load them long edge first.

Switching Between Printing on Continuous 
Paper and Single Sheets

You can easily switch back and forth between printing on 
continuous paper with a push tractor and printing on single 
sheets without having to remove or reload the continuous paper.

Switching to printing on single sheets

Follow the steps below to switch from printing on continuous 
paper from a push tractor to printing on single sheets.

Note:

❏

If continuous labels are loaded in the printer, remove them before 
switching to single-sheet printing. See “Removing continuous 
paper with labels” on page 56 for more information.

❏

If the tractor is in the pull position, remove any continuous paper 
from it before switching to single-sheet printing. See “Removing 
paper from the pull tractor” on page 41 for more information.

1. If any printed pages remain in the printer, press the 

Tear 

Off/Bin

 button to advance the paper to the tear-off position. 

Then tear off the printed pages.

Temperature 

15 to 25°C (59 to 77°F)

Humidity

30 to 60% RH

Summary of Contents for FX 890



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands