Epson FX-80 User Manual Download Page 347

Page: 347 / 376

O-2 lubricant on the shafts and platen bearings, wiping off excess with

cloth. Use G-2 sparingly on ribbon feed, line feed, and carriage return

drive gears, every five million lines.

Changing the Print Head

The expected life of an FX print head is about

100,000,000

charac-

ters (assuming an average of

dots per character). See your Epson

dealer for FX print head replacements.

To remove the old print head:

If you have been printing, turn the printer OFF for about

minutes

to allow the print head to cool. Next, remove the protective lid and

ribbon cartridge. Flip the head lock lever shown in Figure

I-1

toward

the back of the printer.

Figure I-1. Print head replacement

324

Summary of Contents for FX-80

























































































































































































































































































































































































Search results

Summary of Contents for FX-80

Reviews:

Related manuals for FX-80

Brands by name

Popular brands

Epson FX-80, User Manual

Search results

Summary of Contents for FX-80

Reviews:

Related manuals for FX-80

Brands by name

Popular brands