Epson ET-8700 User Manual Download Page 350 | Manualshive

Page: 350 / 360

background image

350

• Do not open the scanner section while the product is copying, printing, scanning, or performing any

other functions.

• Be careful not to trap your fingers when closing the document cover or scanner.

• Except as specifically explained in your documentation, do not attempt to service or disassemble the

product yourself.

• Unplug the product and refer servicing to qualified service personnel under the following conditions: if

the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped
or the case damaged; if the product does not operate normally or exhibits a distinct change in
performance. Adjust only those controls that are covered by the operating instructions.

• Leave the ink packs installed. Removing the ink packs can dehydrate the print head and may prevent

the product from printing.

• Before transporting the product, make sure that the print head is in the home (far right) position.

• When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside down;

otherwise ink may leak.

Parent topic:

Important Safety Instructions

Ink Pack Safety Instructions

• Keep ink packs and maintenance boxes out of the reach of children and do not drink the ink.

• Be careful when you handle used ink packs; there may be ink remaining around the ink supply port. If

ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately
with water. If discomfort or vision problems continue after a thorough flushing, see a doctor
immediately. If ink gets in your mouth, see a doctor right away.

• Do not put your hand inside the product or touch the ink packs during printing.

• Install a new ink pack immediately after removing an expended one. Leaving ink packs uninstalled can

dry out the print head and may prevent the product from printing.

• Do not remove or tear the label on the ink pack; this can cause leakage.

• Do not remove the transparent seal from the ink supply area. This may cause the ink pack to become

unusable.

• Do not touch the green IC chip on the side of the handle. This may prevent normal operation.

• Do not shake ink packs too vigorously; otherwise ink may leak.

• Use an ink pack before the date printed on its package.

• Do not disassemble an ink pack or a maintenance box. Ink may get in your eyes or on your skin.

«
...
348
349
350
351
352
...
»

Summary of Contents for ET-8700









































































































































































































































































































































































Reviews:

No comments

Related manuals for ET-8700

Brand: Oki Pages: 137

Brand: ABLE Pages: 26

Brand: TallyGenicom Pages: 92

Aficio MP C6503SP

Brand: Ricoh Pages: 264

Brand: Konica Minolta Pages: 846

DocuPrint 4050 NPS

Brand: Xerox Pages: 248

Brand: Partex Pages: 12

Imagistics 2500

Brand: Axis Pages: 16

Brand: SII Pages: 85

Brand: Star Micronics Pages: 194

Robojet Disc Autoprinter

Brand: Aleratec Pages: 38

Brand: Ricoh Pages: 284

Brand: Kyocera Pages: 76

ID MAKER Zenius

Brand: IDVille Pages: 66

Brand: Copystar Pages: 1

Brand: Ricoh Pages: 4

Brand: Canon Pages: 37

Brand: Canon Pages: 83

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands