Confidential
Disassembly/Reassembly
Overview
20
Epson Stylus SX230 series / SX235W series / SX430W series / SX440W series
Revision B
2.1 Overview
This chapter describes procedures for disassembling the main parts/units of SX230 series, SX235W series,
SX430W series and SX440W series. Unless otherwise specified, disassembled parts/units can be reassembled by
reversing the disassembly procedure. See the cautions or tips for disassembly/reassembly described in
Detailed Disassembly/Reassembly Procedure for each Part/Unit (p32)"
Read the
before disassembling and reassembling.
When you have to remove units or parts that are not described in this chapter, see the exploded diagrams of SPI
(Service Parts Information).
2.1.1 Tools
Use only specified tools to avoid damaging the printer.
Note 1: Some of the tools listed above are commercially available.
2: EPSON provides the tools listed with EPSON part code.
2.1.2 Jigs
Note *: If performing the disassembling/reassembling procedure is difficult using tweezers such as when reassembling
, the spring hook jig helps you to remove/attach the spring easier.
2.1.2.1 Making the Spring Hook Jig
Fold a clip (commercial item) as shown in
Figure 2-1. Making the Spring Hook Jig
In this chapter, the product names are called as follows:
SX230 series:
Epson Stylus TX235/Epson Stylus SX230/Epson ME OFFICE 535
SX235W series: Epson Stylus NX230/Epson Stylus TX235W/Epson Stylus SX235W/
Epson Stylus TX230W
SX430W series: Epson Stylus NX330/Epson Stylus TX430W/Epson Stylus SX430W/
Epson Stylus SX435W/Epson ME OFFICE 570W
SX440W series: Epson Stylus NX430/Epson Stylus TX435W/Epson Stylus SX440W/
Epson Stylus SX445W
Name
Availability
EPSON Part Code
(+) Phillips screwdriver #1
O
1080530
(+) Phillips screwdriver #2
O
---
Flathead screwdriver
O
---
Flathead Precision screwdriver #1
O
---
Tweezers
O
---
Longnose pliers
O
---
Acetate tape
---
1003963
Name
Quantity
EPSON Part Code
Spring hook jig*
1
Can be made with a commercial item
See " Making the Spring Hook Jig (p20)".
Thickness gauge (1.5 mm)
2
Commercially available
Thickness gauge (2.0 mm)
2
Commercially available
Sonic tension meter
1
1294120
Before folding
Fold here
Clip
40 mm or more
After folding
Fold appropriate length
to hitch a spring.
Clip
Summary of Contents for Epson Stylus NX330
