Epson EPL-N2010, Reference Manual

Page: 158 / 234

A
Technical Specifications
A-15
3. Select the Details tab.
4. Click the arrow next to the Printer Port drop-down list. Then select a
COM (serial) port.
5. Click OK to save this setting.
Using the serial interface utility
You can use serial interface utility that comes with your printer to specify
the port and the baud rate of your computer for the serial interface
connection.
Your printer supports the following serial interface baud rates: 300, 600, 1200,
2400, 4800, 19200, 38400, 57600, 76800, and 115200. If you want to use your
printer with a higher baud rate that is not supported by your computer
system, you can use the utility to match the baud rate between the computer
and the printer.
Note:
This utility may not work with all computer systems.
1. Type HSERIAL at the DOS prompt and press Enter . To bring up the list
of paraments for the port and the baud rate selection.
C:\HSERIAL
2. Select the paramenters referring to the list and type the following:
C:\HSERIAL /P=n /B=m
n=parameter for the port selection
m=parameter for the baud rate selection
For example, if you would like to use the COM1 port at the 57600 baud
rate, type the following:
C:\HSERIAL /P=1 /B=576
If you need help, type the following:
C:\HSERIAL /?