Epson EPL-N2010, Reference Manual

Page: 154 / 234

A
Technical Specifications
A-11
Using the ECP mode in Windows 95 and Windows 98
To use the ECP mode with a Parallel (IEEE 1284-II compliant) connector, your
computer must support the ECP mode.
Note:
The ECP mode is not available with Windows 3.1, 3.11 for Workgroups, Windows
NT 3.51 and NT 4.0.
To use the ECP mode, follow these steps:
1. Make the ECP mode settings in the BIOS setting program that comes
with your computer. (For details of the settings and the program, see
your computer’s documentation).
2. Click the
Start
button, point to
Settings
, and then click
Control
Panel
.
3. Right-click the
System
icon, and click
Open
in the menu that appears.
4. Select the
Device Manager
tab.
5. Select the
ECP Printer Port
under Ports [COM & LPT], then click the
Properties
button.
6. Select the
Resources
tab.
7. Make the appropriate setting in the Resource settings dialog box. (This
setting depends on your computer system. For details, see your
computer manual.)
8. Click
OK
to save the settings.