background image

EPSON Endeavor VL

External Cache

You can install cache SRAM DIP chips to increase the cache

memory to 64KB, 128KB, or 256KB, depending on the

amount of cache memory installed at the factory. You must

change the settings of jumpers J4 through J7 to match the

cache memory size.
Supported 

cache memory 

SRAM 

DIP chips

Socket

Manufacturer

Original manufacturer part number

U20, U21 (15-ns)

Alliance

AS7C256-15PC

Winbond

W24257AK-15

Samsung

KM68257BP-15

Micron

MT5C42568-15

U22 - U28 (20-ns)

Alliance

AS7C256-20PC

Winbond

W24266(7)AK-20

U M C

UM61256-20

Samsung

KM68257 BP-20

 Micron -

 MT5C42568-15

Cache memory configurations

Bank 0

Bank 1

Tag SRAM

Total

U22, U23, U24, U25

U26, U27, U28, U29

(U20, U21)

cache

8 K x 8

8 K x 8

8 K x 8

32Kx8

I

 8Kx8/32Kx8    128KB

32Kx8

I32Kx8

I32Kx8

 256KB

Microprocessor Upgrades

The computer’s processor can be upgraded by replacing the

existing microprocessor with a faster one. You can either

purchase an upgrade kit from EPSON or buy the individual

components separately, as listed in the following table.

Microprocessor upgrade components

l

For the DX/33, DX2/50, DX2/66, DX4 and Pentium OverDrive processor

You may also need to change the settings of jumper J1 or DIP

switches 1,2, and 3.

Hard Disk Drive Types

The following table lists standard hard disk drive types.

Check the table and the drive manufacturer’s documentation

for the correct drive type number. If none of the types listed

matches, select Type 47 (user-defined), and enter the

appropriate numbers for the cylinders, heads, precomp,

landing zone, and sectors in SETUP.

Hard disk drive types

l

Actual formatted size may be slightly different than size on drive label.

EPSON Endeavor VL-6

3/94

Summary of Contents for Endeavor VL












Reviews: