Epson EMP 9000 - SXGA LCD Projector, Owner'S Manual

Page: 81 / 139

■ ■ ■ ■
60
Storing a User Logo
Follow these steps to capture and store a logo:
1. Display the image(with the projector) you wish to use as a
logo.
2. Press the Menu button to open the Menu window.
3. Select the User’s Logo menu option by pressing the down
arrow button on the operation panel or the pointer button
on the remote control. Then press the Enter button to
display the User’s Logo Setting window.
4. The message, “Do you use the present image as a user
logo?” appears on the screen. Choose Yes or No by
pressing the left or right arrow buttons on the control
panel or pressing left or right on the pointer on the
remote control. Then press Enter.
5. A selection box will appear over the image. To select the
portion of the image you wish to use as the logo, use the
arrow buttons on the operation panel or the pointer
button on the remote control. Once you have selected the
desired area, press the Enter button.
6. The message “Do you use this image?” appears on the
screen. Select Yes and press the Enter button. If you want
to change the position, select No.
7. Next, the Zoom rate setting window appears on the
screen. Select a rate using the arrow buttons or pointer,
then press the Enter button.
8. The message “Do you save this user logo?” appears on the
screen. Select Yes and press the Enter button If you don’t
want to save the logo, select No.
♦
Note: Saving the logo may take a moment. Do not use the
projector or other sources (computer, video, speaker, etc.) while
the logo is being saved.