Epson EMP-821 User Manual Download Page 37

Page: 37 / 109

Adjusting the Screen Image

These functions correct and adjust the projected images so that optimum
images can be obtained.

Adjusting the Image Size (Zoom Function)

The size of the projected image is basically determined by the distance
from the projector to the screen.

p.16

The following procedures explain how to adjust the screen image once the
projector itself has been set up.

PROCEDURE

Adjust by turning the zoom ring.

The maximum zoom ratio of the EMP-821 is × 1.6, and that of the
EMP-81/61 is × 1.2.

If you would like to enlarge the image further, move the projector
further away from the screen.

p.16

Focusing the Screen Image

PROCEDURE

Turn the focus ring to adjust the image focus.

If keystone correction or Sharpness settings have been made, it may
not be possible to adjust the focus correctly.

TIP

The E-Zoom function lets you enlarge parts of the image.

p.48

Turn to "W" (wide) to
enlarge the images.

Zoom ring

Turn to "T" (tele) to
reduce the images.

Focus ring

TIP

• If the surface of the lens is dirty or misted over as a result of

condensation, it may not be possible to adjust the focus correctly.
If this happens, clean or de-mist the lens.

p.77

p.84

• If the distance from the lens to the screen is not within the

recommended distance, it is impossible to bring the lens into focus.

If you have trouble obtaining the correct focus, check the
projection distance.

p.16

Summary of Contents for EMP-821














































































































Search results

Summary of Contents for EMP-821

Reviews:

Related manuals for EMP-821

Brands by name

Popular brands

Epson EMP-821, User Manual

Search results

Summary of Contents for EMP-821

Reviews:

Related manuals for EMP-821

Brands by name

Popular brands