Epson EMP-811 User Manual Download

Page: 10 / 120

Part Names and Functions

Front/Top

••••

Air exhaust
vent

••••

Control panel (P.9)

••••

Zoom ring (P.41)

Adjusts the image size.

••••

Lamp cover (P.94)

Open this cover when replacing
the lamp unit inside the projector.

••••

Remote control receiver (P.14)

Receives signals from the remote
control.

••••

Lamp cover opening switch (P.94)

Slide this switch to unlock the lamp
cover when removing it.

••••

Focus ring (P.46)

Adjusts the image focus.

••••

Operation indicator (P.80)

Flashes or lights to indicate the
operating status of the projector.

••••

Lamp indicator (P.80)

Indicates a problem with the
projection lamp or that the lamp
needs to be replaced.

••••

Handle

Hold this handle when
lifting and transporting
the projector.

••••

Lens cover

Attach when not using the projector to
prevent the lens from becoming dirty or
damaged.

••••

Foot adjust button (P.42)

Press this button while lifting up
the projector in order to make
fine adjustments to the
adjustable foot or to retract it.

••••

Temperature indicator

(P.80)

Indicates abnormalities in the
internal projector temperature.

••••

Security lock (

)

(P.102)

••••

Front adjustable foot (P.42)

Extend and retract to adjust the
projection angle.

Summary of Contents for EMP-811

























































































































Search results

Summary of Contents for EMP-811

Reviews:

Related manuals for EMP-811

Brands by name

Popular brands

Epson EMP-811, User Manual

Search results

Summary of Contents for EMP-811

Reviews:

Related manuals for EMP-811

Brands by name

Popular brands