Epson EMP 800, Installation Manual

Page: 5 / 89

5
1.Safety Instructions
Warning
• The installation procedure described in this manual is written for your dealer with who has the
adequate know-how and skill to install the projector.
• In the following situations turn off the projector, and unplug it from the wall outlet.
• If smoke is detected, or if an unusual smell or noise is present.
• If the projector does not work properly due to a failure including no image and no sound on the
screen.
• If liquid or foreign matter has been entered into the projector.
• If the projector has been dropped or the housing has been damaged.
Failure to do so may result in fire or electric shock.
• Never open the cabinet of the projector except for your dealer or qualified service personnel. Do
not disassemble or modify the projector under any circumstances.
Dangerous electrical voltages inside the projector can cause fire, electric shock, or injury.
• Use the type of power source indicated on the projector.
Failure to do so may result in fire or electric shock.
• Use the power cable supplied with the projector.
Failure to do so may result in fire or electric shock.
• Do not use the damaged power cable.
Failure to do so may result in fire or electric shock.
Always take the following precautions when handling the power cable.
• Do not work on the power cable.
• Do not place a heavy object on the power cable.
• Do not bend, twist or pull the power cable by forcing.
• Do not lay the power cable near a heater.
Replace the damaged power cable with the new one.
• Never look into the projector lens when the lamp is switched on.
The bright light can damage your eyes.
• Extra special care must be taken on handling the power plug/power connector. Failure to do so
may result in fire or electric shock.
Always take the following precautions when handling the power plug/power connector.
• Avoid the star-burst connection.
• Ensure that the power plug/power connector is free of dust before inserting it into a socket.
• Ensure that the power plug/power connector is inserted into the socket securely.
• Do not insert or disconnect the power plug/power connector with wet hands.
• Do not pull the power cable to disconnect the power plug/power connector. Always disconnect
the power plug holding the plug or connector itself.
• A lot of glass components such as a lens and lamp are employed in the projector.
If any of the components is broken, handle it so you do not cut yourself. Refer all servicing to the
EPSON Service Center.
• Do not place a vase, container filled with water, or chemicals on the projector.
Failure to do so may result in fire or electric shock due to spillover or entry of water or chemicals.
• Do not insert or drop objects of any kind including a metal, flammable material, and foreign
matter into the openings such as the vent hole on the projector.
Failure to do so may result in fire or electric shock.
• Do not place the projector or remote control with batteries inserted in an extremely heated place,
such as a car with all windows closed, an area exposed to direct sunlight, and an air flap of an air
conditioner/heater.
It may result in deformation due to heat, or the adverse effect on the components inside the
projector which may lead to fire.
• Do not step on the projector or place a heavy object on it.