manualshive.com logo in svg

Epson EMP-1815, User Manual

Share
Download
Epson EMP-1815 User Manual Download Page 79

Appendices

This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.

Installation Methods ........................................... 80
Cleaning............................................................... 81

• Cleaning the Projector's Surface .....................................81

• Cleaning the Lens..............................................................81

• Cleaning the Air Filter and Air Intake Vent ..................81

Replacing Consumables .................................... 82

• Replacing the Remote Control Batteries ........................82

• Replacing the Lamp ..........................................................83

Lamp replacement period ...............................................................83
How to replace the lamp.................................................................84
Resetting the lamp operating time..................................................86

• Replacing the Air Filter ....................................................87

Air filter replacement period ..........................................................87
How to replace the air filter............................................................87

Saving a User’s Logo ......................................... 88
Screen Size and Distance .................................. 90
Connecting USB Devices (Digital Camera, 
Hard Disk Drive or Memory Devices) 
(EMP-1825 Only) ................................................. 91

• Connecting USB Devices ..................................................91

Inserting and Ejecting CompactFlash Cards 
(EMP-1825 Only) ................................................. 92

• How to Insert Cards..........................................................92

• How to Remove Cards ......................................................92

Card Slot Access Indicator Statuses...............................................93

Connecting to External Equipment ...................94

• Connecting to an External Monitor................................ 94

• Connecting to External Speakers.................................... 94

Connecting a LAN Cable (EMP-1825 Only) .......95
Optional Accessories and Consumables .........96

Optional accessories....................................................................... 96
Consumables .................................................................................. 96

Glossary...............................................................97
ESC/VP21 Commands ........................................99

• Command List .................................................................. 99

• Cable Layouts ................................................................... 99

Serial connection............................................................................ 99
Communications protocol .............................................................. 99

Network Projector (EMP-1825) .........................100
PJLink (EMP-1825 Only) ...................................101
List of Supported Monitor Displays ................102

Computer image........................................................................... 102
Component video ......................................................................... 102
Composite video/S-video............................................................. 102

Specifications....................................................103

Projector general specification..................................................... 103
Software Requirements (Only EMP-1825).................................. 105

Appearance........................................................108

Index...................................................................109

Summary of Contents for EMP-1815
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands