Epson EMP-1815 User Manual Download

Page: 93 / 111

Inserting and Ejecting CompactFlash Cards (EMP-1825 Only)

Press the eject button again.

The CompactFlash card is ejected from the card slot. Remove the
card from the card slot.

Card Slot Access Indicator Statuses

When a CompactFlash card is inserted into the projector, the access status
of the card is indicated by the lighting status of the card slot access
indicator.

Attention

Be sure to push the eject button back in. If the eject button stays
out, it may become bent or damaged in other ways.

: Flashing

: Lit:

: Off

Indicator

Status

Access Status

Flashing

Data is either being read from or being written to the
CompactFlash card.

Lit

The CompactFlash card is standing by.

Off

The CompactFlash card is not performing any operations.

Summary of Contents for EMP-1815
















































































































Search results

Summary of Contents for EMP-1815

Reviews:

Related manuals for EMP-1815

Brands by name

Popular brands

Epson EMP-1815, User Manual

Search results

Summary of Contents for EMP-1815

Reviews:

Related manuals for EMP-1815

Brands by name

Popular brands