manualshive.com logo in svg

Epson EMP-1815, User Manual

Share
Download
Epson EMP-1815 User Manual Download Page 100

100

Network Projector (EMP-1825)

You can connect projector and computer via a network using either 
"EMP NS Connection" supplied with the projector or "Network 
Projector" function provided with Windows Vista.
The "EMP NS Connection" application provides a wide range of 
features for use in meetings and presentations, such as the 
distribution function, multi-screen display, movie sending mode, and 
presentation mode. 

s

EasyMP Operation Guide

The "Network Projector" function of the OS can identify and use a 
network-connected projector without the need to install an application.

When the projector is connected to a computer over a network, you 
can project an image stored on the computer by means of the 
following procedure.

A

Turn on the power to the projector.

B

Click "Start" on a computer.

C

Click "All Programs" - "Accessories" - "Network 
Projector".

The connection setting screen is displayed.
You can now either identify the projector by inputting its IP 
address, or allow the OS to automatically identify all of the 
connected projectors. Once the OS has identified all of the 
connected projectors, select the one that you want to use.
You are now prompted to enter the projector password.  Input the 
"Projector keyword," shown at the bottom of the EasyMP standby 
screen. 

s

 

p.50

Supported OS

Windows:Vista Basic/Vista Home Premium/Vista Business/
Vista Enterprise/Vista Ultimate

From your computer, you can select a 
network-connected projector to use.

Internet

LAN

Procedure

Using the remote control

Using the control panel

Summary of Contents for EMP-1815
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands