Epson ELPMB60, Installation Manual

Page: 15 / 244

Installation Procedure
13
1: Concrete
2: Ceiling surface
a: Female threading type anchor
b: Eye bolt
c: Flat washer
d: Spring washer
e: Hexagonal nut
*: At least 3 ridges of the screw should be visible.
However, do not extend more than 9 mm as this will touch
the mount.
When the mounting location is wood
Warning
When installing using wood screws, make sure that the base is at least 20 mm thick.
Attaching the Ceiling Mount/Floor Stand Plate
a
Drill mounting holes in the installation location.
b
Attach ceiling mount/floor stand plate A to the ceiling.
Make sure you acquire commercially available items to be used for installation.