Using the Product Safely
1
Safety Instructions
This guide explains how to install the projector on the ceiling, on a wall, or on the floor using the ELPMB60
ceiling mount/floor stand supplied.
Make sure you read this guide carefully to use the installation mounts and the projector safely. Incorrect
handling that ignores instructions in this guide could damage this product or could result in personal injury
or property damage. Keep this installation guide at hand for future reference.
Regarding how to handle the projector, read the
User's Guide
and
Safety Instructions
supplied with your
projector and follow the instructions in these documents.
Type of Installation
This product can be installed on the ceiling, on a wall, or on the floor.
Safety Indications
The documentation and this product use graphical symbols to show how to use this product safely and
correctly to prevent injury to customers and others, and damage to property.
The indications and their meaning are as follows. Make sure you understand them properly before reading
the guide.
Symbol
Explanation
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or
even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or
physical damage due to incorrect handling.
General Information Indications
Symbols
Explanation
Symbol indicating an action that must not be done
Symbol indicating an action that should be done
c
Symbol indicating related or useful information
Summary of Contents for ELPMB60
