Connecting Computers
You can use any of the following ports to connect computers to the projector:
•
Computer1 or Computer2 (VGA connections)
•
HDMI
•
USB TypeB (USB Display, not recommended because of reduced interactive performance on interactive
products)
•
LAN (RJ-45)
If you connect VGA cables to both the
Computer1
and
Computer2
ports, make sure you label the cables.
For computer interactive pen support (using Easy Interactive Tools or other 3rd party annotation software),
you need to connect a USB cable from the computer to the projector.
Connecting Through a Network
If both the projector and computer are connected to the same network by an Ethernet cable, users can project
through the network. You must install the EasyMP® Network Projection software on the computer. This
software is available on the
Epson Projector Software
CD that came with the projector or at
epson.com/
support
(U.S.) or
epson.ca/support
(Canada).
If your network includes a wireless router, users can connect to the projector on the network wirelessly from
computers (using EasyMP Network Projection software). Users can also connect wirelessly from an iPad,
iPhone, or iPod touch using the optional Epson iProjection™ app. When the projector is connected to these
devices, only the built-in toolbar is available (single pen support).
If the projector is not connected to a network via a LAN cable (or the network does not include a wireless
router), you can purchase the optional wireless LAN module for the projector. This will allow wireless
projection directly from a computer to the projector.
VGA connections
HDMI connection
LAN connection
USB Display/interactivity
and dual pen support
Wireless network connection with
interactivity using the built-in toolbar
Wireless router or
access point
