Epson EISA Series, User Manual

Page: 80 / 180

3. Pull the board straight up and out of the system board
interface sockets; do not rock it back and forth.
4. If you are installing a math coprocessor, place the board on a
static-free surface with the component side facing up. Then
see “Math Coprocessor,” below, for further instructions.
If you are replacing the processor board, store it in an anti-
static bag in a safe location. Then see the next section for
instructions on installing your new processor board.
Installing the Processor Board
Follow these steps to install the processor board:
1. Insert the connectors on the bottom of the processor board
into the processor board connectors on the main system
board. (If necessary, see page 5-2 to locate the connectors.)
Be sure to insert the board straight into the connectors; do
not insert it at an angle or rock it back and forth.
5-8 Installing and Removing Options