Epson EH-TW7400, User Manual

Page: 71 / 109

Configuration Menu
70
Wireless LAN menu
Function Menu/Settings Explanation
Connection Mode Quick, Advanced Determines how the wireless LAN is connected.
Quick : Using Epson iProjection allows you to connect to
smartphones, tablets, or computers directly using wireless
communication. The projector becomes a simple access
point. (Make sure the number of devices connected to the
projector is six or less.) It may take longer to update the pro-
jected image if the number of connected devices exceeds this
number.
Advanced : Lets you connect to multiple smartphones, tab-
lets, or computers over a wireless network access point.
Channel 1ch, 6ch, 11ch (This can only be set when Connection Mode is set to Quick .)
Select the frequency bandwidth used by the wireless LAN.
SSID Up to 32 alphanumeric
characters (This can only be set when Connection Mode is set to Ad-
vanced .)
Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
Search Access Point To Search View (This can only be selected when Connection Mode is set to
Advanced .)
Search for available wireless network access points.
indicates currently connected access points. indicates
the access points where security is set.
If you select an access point which has security, Security menu
appears.
s
p.71
IP Settings
(This can only be set
when
Connection
Mode is set to Ad-
vanced .)
DHCP Sets whether or not to use DHCP (On or Off). If this is set to
On , you cannot set any more addresses.
IP Address Inputs the IP address for the projector.
The following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask Inputs the subnet mask for the projector.
The following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address Inputs the gateway IP address of the projector.
The following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display On, Off Sets whether or not to display the SSID on the LAN Standby
screen and the Home screen (On or Off).
IP Address Display On, Off Sets whether or not to display the IP address on the LAN
Standby screen and the Home screen (On or Off).