Epson EH-TW7300, User Manual

Page: 89 / 134

Configuration Menu
88
Basic menu
Function Menu/Settings Explanation
Projector Name Up to 16 alphanumeric
characters Enter a name to identify the projector over a network.
PJLink Password Up to 32 alphanumeric
characters Set a password to use when you control the projector using
compatible PJLink software.
s
p.116
Remote Password Up to 8 alphanumeric
characters Set a password to use when you operate the projector from
a smartphone or a tablet.
Display LAN Info. Text & QR Code, Text Set the display format for the projector's network information.
Wireless LAN menu
Function Menu/Settings Explanation
Connection Mode Quick, Advanced Determines how the wireless LAN is connected.
Quick : Lets you connect to multiple smartphones, tablets, or
computers directly using wireless communication. Use
EasyMP MultiPC Projection to connect in this connection
mode. The projector acts as an easy access point.
(We recommend limiting the number of devices to six or less
to maintain the projection performance.)
Advanced : Lets you connect to multiple smartphones, tab-
lets, or computers over a wireless network access point.
Channel 1ch, 6ch, 11ch (This can only be set when Connection Mode is set to Quick .)
Select the frequency bandwidth used by the wireless LAN.
SSID Up to 32 alphanumeric
characters
(This can only be set when Connection Mode is set to Ad‐
vanced .)
Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
Search Access Point To Search View (This can only be selected when Connection Mode is set to
Advanced .)
Search for available wireless network access points.
indicates currently connected access points. indicates
the access points where security is set.
If you select an access point which has security, Security menu
appears.
s
p.89
IP Settings
(This can only be set
when
Connection
Mode is set to Ad‐
vanced .)
DHCP Sets whether or not to use DHCP (On or Off). If this is set to
On , you cannot set any more addresses.
IP Address Inputs the IP address for the projector.
The following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask Inputs the subnet mask for the projector.
The following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address Inputs the gateway IP address of the projector.
The following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)