Epson EH-TW710 User Manual Download Page 20

Page: 20 / 179

Projector Placement

Warning

• Do not cover the projector's air intake or air exhaust vents. If the vents are

covered, the internal temperature could rise and cause a fire.

• Do not use or store the projector in locations where it will be subject to dust or

dirt. Otherwise, the quality of the projected image may decline, or the air filter

may become clogged, resulting in a malfunction or fire.

• Do not install the projector on an unstable surface or in a location beyond the

weight specifications of the projector. Otherwise, it could fall or topple causing

an accident and injury.

• When installing the projector in a high position, take measures to prevent falling

by using wires to ensure safety in an emergency, such as an earthquake, and to

prevent accidents. If it is not installed correctly, it could fall causing an accident

and injury.

• Do not install in locations where salt damage could occur, or in locations subject

to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion

could cause the projector to fall. It could also cause the projector to malfunction.

Attention

• Do not operate the projector on its side. This may cause the projector to

malfunction.

• If you are using the projector at altitudes above 1,500 m, set the

High Altitude

Mode

setting to

in the projector's menu to ensure the projector's internal

temperature is regulated properly.

Extended

Operation

High Altitude Mode

• Try not to setup the projector in locations subject to high humidity and dust, or

in locations subject to smoke from fires or tobacco smoke.

p.20

• "Projection Distance"

p.20

• "Image Shape"

p.44

• "Projector Setup Settings - Extended Menu"

p.117

Projector Setup and Installation Options

You can set up or install your projector in the following ways:
Front/Rear

Front Ceiling/Rear Ceiling

Make sure you select the correct

Projection

option in the projector's

Extended

menu according to the installation method being used.

Related Links

• "Projection Modes"

p.40

Projection Distance

The distance at which you place the projector from the screen determines the

approximate size of the image. The image size increases the farther the

Summary of Contents for EH-TW710




















































































































































































Search results

Summary of Contents for EH-TW710

Reviews:

Related manuals for EH-TW710

Brands by name

Popular brands

Epson EH-TW710, User Manual

Search results

Summary of Contents for EH-TW710

Reviews:

Related manuals for EH-TW710

Brands by name

Popular brands