Epson EH-TW6600 User Manual Download Page 108

Page: 108 / 123

Maintenance

107

Install the new lamp.

Make sure the lamp is facing the correct
direction and press it in.

Tighten the two lamp fixing screws.

Replace the lamp cover.

Slide the cover back into place.

Tighten the lamp cover fixing screw.

Warning

Do not disassemble or remodel the lamp. If a modified or disassembled lamp is installed in the projector
and used, it could cause a fire, electric shock, or an accident.

Caution

•

Make sure you install the lamp and lamp cover securely. If they are not installed correctly, the power does
not turn on.

•

The lamp contains mercury (Hg). Dispose of used lamps in accordance with your local laws and regulations
on disposing of fluorescent tubing.

Summary of Contents for EH-TW6600




























































































































Search results

Summary of Contents for EH-TW6600

Reviews:

Related manuals for EH-TW6600

Brands by name

Popular brands

Epson EH-TW6600, User Manual

Search results

Summary of Contents for EH-TW6600

Reviews:

Related manuals for EH-TW6600

Brands by name

Popular brands