Basic Operations
27
When the left or right is too wide
c
•
You can adjust the volume by pressing the
buttons when the gauges are not displayed.
s
•
You can set H/V-Keystone from the Configuration menu.
s
Settings
-
Keystone
-
H/V-Keystone
-
V-
Keystone
/
H-Keystone
•
In the factory default, H/V-Keystone is reset when the power is turned off. To retain the setting, set
Auto V-Keystone
and
H-Keystone Adjuster
to
Off
.
s
Settings
-
Keystone
-
Auto V-Keystone
/
H-
Keystone Adjuster
•
You can make effective corrections within a projection angle of 30° top to bottom and left to right.
Adjusting the Volume
You can adjust the volume by using the
buttons on the remote control or the
buttons
on the projector's control panel.
Remote control
Control panel
c
•
You can also adjust the volume from the Configuration menu.
s
Settings
-
Volume
•
Under normal conditions, you can adjust the volume of the projector's built-in speaker. However, by
connecting an AV system to the projector and setting
HDMI Link
to
On
and
Audio Out Device
to
AV
System
, you can adjust the AV system's volume when projecting from
HDMI1
and
HDMI2
sources.
s
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can gradually increase the volume when you next turn on the power.
Summary of Contents for EH-TW5100
Page 1: ...User s Guide ...
