Epson EH-LS500B User Manual Download

Page: 85 / 112

Maintenance

Remove the air filter.

Grip the knob in the center of the air filter
and pull it out.

Hold the air filter with the surface
facing down and tap it 4 or 5 times to
remove the dust.

Turn it over and tap the other side in the
same way.

Attention

If the air filter is hit too hard, it may
become unusable due to deformities
and cracks.

Remove any dust remaining on the air
filter by using a vacuum cleaner from
the front side.

Attention

•

Do not rinse the air filter in water. Do not
use detergents or solvents.

•

Do not use an air duster. Combustible
material may remain, and dust may
enter the precision parts.

Install the air filter.

Grip the air filter by the knob in the center
and insert it straight.

Close the air filter cover and tighten
the fixing screws.

Summary of Contents for EH-LS500B

















































































































Search results

Summary of Contents for EH-LS500B

Reviews:

Related manuals for EH-LS500B

Brands by name

Popular brands

Epson EH-LS500B, User Manual

Search results

Summary of Contents for EH-LS500B

Reviews:

Related manuals for EH-LS500B

Brands by name

Popular brands