(2) Brightness Level (EB-Z8455WU/Z8450WU/Z8355W/Z8350W/Z10005/Z10000 only)
Adjust the
Brightness Level
so that the brightness of the lamp for each
projector matches.
Press the [Menu] button >
Extended
>
Multi-Projection
>
Brightness
Level
Adjust so that all projectors are the same brightness as the darkest lamp.
You can adjust the brightness in five levels.
a
•
Set
Power Consumption
to
Normal 1
.
Press the [Menu] button >
Settings
>
Power Consumption
•
Even if you adjust the
Brightness Level
, the brightness of each lamp
may not match exactly.
(3) Edge Blending
Fine tune overlapping areas to make seamless screen.
Perform this in
Edge Blending
from the Configuration menu.
Press the [Menu] button >
Extended
>
Multi-Projection
>
Edge Blending
The following screen is displayed.
Operations
a
From the screen above, set
Edge Blending
and
Guide Display
to
On
.
b
Set
Edge
according to the parts of the image that overlap.
Example: When setting the screen in (1)
(1)
The top and left edges of the projected image overlap, so select
Top
Edge
and
Left Edge
, and then set
Blending
to
On
.
Projecting Images
39