22
Press .
After
stopping, when you press
, playback is
resumed from the interrupted scene (resume).
A
When you have played back a disc,
press
to eject the disc from its slot.
•
Once you have pressed
, if you want to play
back the ejected disc again, you cannot push it
back into the disc slot manually. Press
.
B
Press .
You can use the
on the main unit to achieve
the same effect as the effect of the
on the
remote control.
C
Unplug the power cable from the
electrical outlet after the confirmation
buzzer beeps twice.
If you only press
to turn off the power,
electricity continues to be consumed.
D
Close the lens cover.
Keep the lens cover in place when the unit is not
being used to protect the lens from dirt and
damage.
•
If you turn on the projector immediately after
turning it off, the load time to project images
becomes longer.
Notes on resume play
•
If you press
when “Loading” is displayed
on the screen, “Resume Play” is displayed and
the disc is played from the last stop position.
•
Remember that the resume play function is
canceled if you press
twice.
•
You cannot resume playing a disc indicated as
on the File List and on VR
formatted .
•
You can resume playing up to 10 discs that you
have recently played even if you replace the
discs.
•
The position from where playback resumes may
be slightly different to where playback was
stopped.
•
The audio language, subtitle language, and angle
settings are memorized along with the stopping
position.
•
If you stop play when the disc menu is displayed,
the resume play may fail.
Stopping playback
Disconnecting the power cable before the projector beeps
may damage the optical components.
Turning off the power
