Epson EB-W70 User Manual Download

Page: 94 / 99

Laser Safety Information

This projector is a Class 1 laser product that complies with the IEC/EN60825-

1:2014 international standard for lasers. Follow these safety instructions when

using the projector.

Warning

• Do not open the projector's case. The projector contains a high-powered laser.
• Possibly hazardous optical radiation emitted from this product. Do not look at

operating light source. Eye injury may result.

Caution

Do not disassemble the projector when disposing of it. Dispose according to your

local or national laws and regulations.

• The projector uses a laser as the light source. The laser has the

following characteristics.
• Depending on the surroundings, the brightness of the light source

may decline. The brightness declines a lot when the temperature

gets too high.

• The brightness of the light source declines the longer it is used.

You can change the relationship between usage time and decline in

brightness settings.

Related Links

• "Laser Warning Labels"

p.94

Laser Warning Labels

Laser warning labels are attached on the projector.

Inside

Side
As with any bright source, do not stare into the beam, RG2 IEC/EN 62471-

5:2015.

Summary of Contents for EB-W70




































































































Search results

Summary of Contents for EB-W70

Reviews:

Related manuals for EB-W70

Brands by name

Popular brands

Epson EB-W70, User Manual

Search results

Summary of Contents for EB-W70

Reviews:

Related manuals for EB-W70

Brands by name

Popular brands