Epson EB-W70 Page 11 User Manual Download

Page: 11 / 99

Projector Parts and Functions

Name

Function

Foot release lever

Press the foot release lever to extend and retract the

front adjustable foot.

Ceiling Mount / Floor

Stand fixing point or

Lighting Track Mount

fixing point

Attach the optional Ceiling Mount / Floor Stand or

Lighting Track Mount here.

Rear feet (Ceiling

Mount / Floor Stand

fixing points or

Lighting Track Mount

fixing points)

Loosen these feet by turning them counterclockwise,

and then remove them to attach the optional Ceiling

Mount / Floor Stand or Lighting Track Mount.

Front adjustable foot When setup on a surface such as a desk, extend the foot

to adjust the position of the image.

Air filter cover

Open to access the air filter.

Related Links

• "Air Filter and Vent Maintenance"

p.71

• "Adjusting the Image Height"

p.31

Projector Parts - Control Panel

Name

Function

Power button

Turns the projector on or off.

Focus lever

Adjusts the image focus.

Indicators

Indicates the projector's status.

Volume up/down

buttons

Adjusts the volume for the speaker and headphones.
You can also control the volume for Bluetooth audio

devices connected to the projector.

Horizontal keystone

buttons

Displays the Keystone screen allowing you to correct

horizontal keystone distortion.

Related Links

• "Projector Indicator Status"

p.75

• "Correcting the Image Shape Horizontally with the Horizontal Keystone

Buttons"

p.32

• "Turning On the Projector"

p.27

• "Focusing the Image Using the Focus Lever"

p.36

• "Controlling the Volume with the Volume Buttons"

p.49

Summary of Contents for EB-W70




































































































Search results

Summary of Contents for EB-W70

Reviews:

Related manuals for EB-W70

Brands by name

Popular brands

Epson EB-W70, User Manual

Search results

Summary of Contents for EB-W70

Reviews:

Related manuals for EB-W70

Brands by name

Popular brands