D
If you press the [Esc] button, the file list screen is displayed
again.
Sequentially projecting all image files in a folder (Slideshow)
You can project images files in a folder sequentially, one at a time.
This function is called Slideshow. Use the following procedure to run a
Slideshow.
q
To change files automatically in the Slideshow, set the
Screen
switching time
to any value other than
No
in the
Option
screen.
This is set to
No
by default.
s
Procedure
A
Start a Slideshow.
s
The file list screen appears.
B
Press the [
][
][
][
] buttons to set the cursor
to the folder for which you want to run the Slideshow, then
press the [Enter] button.
C
Select "Slideshow" on the bottom of the file list screen and
press the [Enter] button.
The Slideshow starts, projecting the image files in the folder
automatically in sequence, one at a time.
Once the Slideshow reaches the end, the screen automatically
returns to the file list screen. If
Continuous Play
is set to
On
in
the
Option
screen, once the Slideshow reaches the end, it is
repeated from the beginning.
s
While projecting a Slideshow, you can go to previous/next screen
or cancel playback.
q
If
Screen switching time
is set to
No
in the
Option
screen, the
files will not change automatically after you start the playback of
the Slideshow. Press the [Enter] button or the [Page] button
(Down) to project the next file.
Making a Presentation with a Slideshow (EB-W8/X8 only)
45
