Epson EB-S04 Page 19 User Manual Download

Page: 19 / 166

Projector Placement

You can place the projector on almost any flat surface to project an image.

If you cannot install the projector parallel to the screen, correct

keystone distortion using the projector controls.

You can also install the projector in a ceiling mount if you want to use it in a

fixed location. An optional ceiling mount is required when suspending the

projector from a ceiling.

Warning

Note the following points when selecting a projector location:

• You must install a ceiling mount when suspending the projector from a ceiling.

• Place the projector on a sturdy, level surface or install it using a compatible

If you do not install the projector correctly, it could fall and cause damage or

mount.

injury.

• Do not use adhesives on the ceiling mount fixing points to prevent the screws

from loosening, or use lubricants, oils, or similar substances on the projector; the

projector case may crack causing it to fall from its ceiling mount. This could

cause serious injury to anyone under the ceiling mount and could damage the

projector.

• Do not cover the projector's air intake or air exhaust vents. If the vents are

covered, the internal temperature could rise and cause a fire.

Attention

• Do not operate the projector on its side. This may cause the projector to

malfunction.

• Leave plenty of space around and under the projector for ventilation, and

• If you are using the projector at altitudes above 1500 m, set the

High Altitude

do not place it on top of or next to anything that could block the vents.

Mode

setting to

in the projector's

Extended

menu to ensure the projector's

internal temperature is regulated properly.

• Position the projector within reach of a grounded electrical outlet or

Extended

Operation

High Altitude Mode

extension cord.

• Place the projector parallel to the screen.

p.19

• "Projection Distance"

p.20

• "Image Shape"

p.41

• "Projector Setup Settings - Extended Menu"

p.107

• "Optional Accessories"

p.148

Projector Setup and Installation Options

You can set up or install your projector in the following ways:

Summary of Contents for EB-S04







































































































































































Search results

Summary of Contents for EB-S04

Reviews:

Related manuals for EB-S04

Brands by name

Popular brands

Epson EB-S04, User Manual

Search results

Summary of Contents for EB-S04

Reviews:

Related manuals for EB-S04

Brands by name

Popular brands