Epson EB-PU1006W User Manual Download

Page: 29 / 191

Attaching and Removing a Lens

Follow the instructions in these sections to attach or remove a compatible

lens.

Warning

Make sure you turn off the projector and unplug the power cord before attaching

or removing a lens. Otherwise, you may receive an electric shock.

Attention

• If dust or dirt gets inside the projector, projection quality deteriorates and it

could cause a malfunction. Be sure to observe the following precautions when

handling.

• Make sure the front of the projector is not facing up when you attach or

remove the lens.

• Remove the lens only when necessary.

• Store the projector with the lens installed.

• Avoid touching the lens with your bare hands to prevent fingerprints on or

damage to the lens surface.

Related Links

Attaching a Lens

You can attach a compatible lens to the projector.

For information on installing an ultra short-throw zoom lens, see the

User's Guide

supplied with the lens.

Turn off the projector and unplug the power cord.

Pull the lens cover off of the projector.

Remove the stopper, if necessary.

Summary of Contents for EB-PU1006W
































































































































































































Search results

Summary of Contents for EB-PU1006W

Reviews:

Related manuals for EB-PU1006W

Brands by name

Popular brands

Epson EB-PU1006W, User Manual

Search results

Summary of Contents for EB-PU1006W

Reviews:

Related manuals for EB-PU1006W

Brands by name

Popular brands