Submenu
Function
HDBaseT
Control Communications
: (This cannot be set when
Extron XTP
is set to
On
.) When set to
On
, Ethernet
communication, serial communication, and the wired
remote control through the HDBaseT Transmitter connected
to the HDBaseT port are all enabled.
Extron XTP
: Set to
On
when you connect the Extron XTP
transmitter or switcher to the HDBaseT port. See the
following Extron Web site for more details on the XTP
system.
a
When
Control Communications
or
Ex‐
tron XTP
is set to
On
,
Standby Mode
is
automatically set to
Communication On
.
When
Control Communications
or
Ex‐
tron XTP
is
On
, the projector's LAN
port, RS-232 port, and Remote port are
disabled.
When
Extron XTP
is set to
On
, the fan
may rotate in standby mode but this is
not abnormal.
Submenu
Function
SDI Settings
Set the signal from the 3G/HD/SD SDI port.
SDI
: When
Single (Auto)
is selected as the
Link Type
, the
payload ID for the input signal is read and the image is
displayed automatically. When you know the type of input
signal, select
Single (Manual)
and set the same signal as the
input signal used in
Manual Settings
to fix it to the same
signal as the input signal.
For
Manual Settings
, set the following items, select
Set
, and
then press the [
] button. Not all combinations of items in
Manual Settings
are supported.
SDI Type
: Select from the SDI types displayed.
Resolution
: Select from the resolutions displayed.
Refresh Rate
: Select from the refresh rates displayed.
Color Sampling
: Select from the color samplings
displayed.
Color Depth
: Select from the color depths displayed.
Color Calibra‐
tion
Color Calibration
: Enables/disables the color calibration
function.
Start Auto Adjustment
: Automatically adjusts the color
tone for the whole screen.
s
Undo
: Undoes the auto adjustment.
Redo
: Redoes the auto adjustment.
Color Uniformity
: Adjusts the color tone balance for the
whole screen.
s
Reset
: You can reset all adjustment values for
Color
Calibration
to their default values.
List of Functions
150
Summary of Contents for EB-L30000U
