158
5.
Select the edge you want to blend on each projector and press
Enter
.
You see a screen like this:
6.
Select the
Blending
setting and select
On
.
7.
Press
Esc
to return to the previous screen.
8.
Select the
Blend Start Position
setting and adjust the point where edge blending begins.
Note:
If you created a unified image area using the Edge Blending feature, set the
Blend Start
Position
setting to
0
.
9.
Select the
Blend Range
setting and use the arrow buttons to select the width of the blended area so
that the displayed guides are at the edges of the overlapping area between the two images.
Note:
If you created a unified image area using the Edge Blending feature, set the
Blend Range
setting to
300
.
10. Select the
Blend Curve
setting and select a gradient for the shaded area on the projectors.
11. Press
Esc
to go back to the previous screen.
Summary of Contents for EB-750F
