147
4.
Press the
USB
button on the remote control to project the playlist.
The playlist that was played last is projected. If a timetable is assigned, the playlist will play back
according to the schedule in the timetable.
Note:
You can also hold down the
Num
and numeric buttons to project your playlist. You can set a
remote control shortcut key using the software you used to create the playlists.
Note:
To select a specific playlist, press the
USB Viewer
button on the remote control and use the arrow
buttons to select your playlist.
Parent topic:
Projecting in Content Playback Mode
Creating a Playlist Using Epson Web Control
You can create playlists using a web browser and save them to a USB flash drive connected to a
projector on a network when the projector is in Content Playback mode.
Caution:
Do not remove the USB flash drive from the projector or disconnect the projector's power cord
while creating playlists. Data saved on the USB flash drive may be damaged.
1.
Make sure the projector is in Content Playback mode.
2.
Make sure your computer or device is connected to the same network as the projector.
3.
Connect a USB device to the projector's
USB-A
port.
4.
Start your web browser on your computer or device.
5.
Enter the projector's IP address into the browser's address box and press the computer's
Enter
key.
Note:
When entering an IPv6 address, wrap the address with [ and ].
Summary of Contents for EB-750F
