background image

58

Saving a User's Logo

You can save the image that is currently being projected as a  user's 
logo. 

A

Project the image you want to use as the user's 
logo, and then press the [Menu] button. 

B

In the configuration menu, select "Extended"-
"User's Logo". 

s

"Using the Configuration Menu" 

p.25

Check the buttons you can use and the operations they perform in 
the guide under the menu.

C

When "Choose this image as the User's Logo?" is 
displayed, select "Yes".

q

When a user's logo is saved, the previous user's logo is 
erased. 

Procedure

Using the remote control

Using the control panel

q

• If "User's Logo Protect" from "Password Protect" is set 

to "On", a message is displayed and the user's logo 
cannot be changed. You can make changes after setting 
"User's Logo Protect" to "Off". 

s

p.20

• If "User's Logo" is selected when Keystone, E-Zoom, 

Aspect, or Progressive are being performed, the function 
currently being performed is cancelled.

q

When you press the [Enter] button on the remote control or 
the control panel, the screen size may change as it changes 
to the resolution of the image signal.

Summary of Contents for EB-410W













































































Reviews: