Epson EB-1840W, User Manual

Page: 79 / 133

Submenu Function
Video Signal
You can select the input signal from the S-Video port or the
Video port. If this is set to
Auto , video signals are recognized
automatically. If interference appears in the image or a problem
occurs such as no image is being projected when set to
Auto ,
select the appropriate signal depending on the connected
equipment.
Aspect You can set the aspect ratio
g
for projected images.
s
"Changing the Aspect Ratio of the Projected Image " p.42
Overscan (This setting can only be adjusted when a component video or
RGB video signal is being input.)
Changes the output image ratio (the range of the projected
image). You can set the cropping range to
Off
,
4%
, or
8%
. When
the source is HDMI,
Auto
is available (EB-1880/EB-1870/
EB-1850W only). When
Auto
is selected, it automatically
changes to
Off
or
8%
according to the input signal.
Reset
You can reset all adjustment values on the
Signal
menu to their
default settings, except for
Input Signal
.
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.89
Settings Menu
Submenu Function
Keystone
You can correct keystone distortion.
•
When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
You can also set
H-Keystone Adjuster (EB-1880/EB-1870/
EB-1850W only) and Auto V-Keystone to On or Off .
s
"Correcting Keystone Distortion" p.35
•
When Quick Corner is selected:
Select and correct the four corners of the projected image.
s
"Quick Corner" p.37
Control Panel
Lock
You can use this to restrict operation of the projector's control
panel.
s
"Restricting Operation (Control Panel Lock)" p.61
List of Functions
79