q
•
If Password Protect is already activated, you must enter the
Password.
If the Password is entered correctly, the Password Protect setting
menu is displayed.
s
•
When the Password is set, stick the Password protect sticker in a
visible position on the projector as a further theft deterrent.
B
Turn on Power On Protect.
(1)
Select
Power On Protect
, and then press the [Enter] button.
(2)
Select
On
, and then press the [Enter] button.
(3)
Press the [Return] button.
C
Turn on User's Logo Protect.
(1)
Select
User's Logo Protect
, and then press the [Enter] button.
(2)
Select
On
, and then press the [Enter] button.
(3)
Press the [Return] button.
D
Turn on Network Protect.(EB-1925W/1920W/1915/1910/1830
only)
(1)
Select
Network Protect
, and then press the [Enter] button.
(2)
Select
On
, and then press the [Enter] button.
(3)
Press the [Return] button.
E
Set the Password.
(1)
Select
Password
, and then press the [Enter] button.
(2)
The message
"Change the password?"
is displayed, select
Yes
and then
press the [Enter] button. The default setting for the Password is "0000".
Change this to your own desired Password. If you select
No
, the screen
shown in step 1 is displayed again.
(3)
While holding down the [Num] button, enter a four digit number using
the numeric buttons. The number entered is displayed as "
*
*
*
*
".
When you enter the fourth digit, the confirmation screen is displayed.
Remote Control
A
Numeric buttons
B
Keep pressed
(4)
Re-enter the Password.
The message
"Password accepted."
is displayed.
If you enter the Password incorrectly, a message is displayed prompting
you to re-enter the password.
Entering the Password
When the Password entry screen is displayed, enter the Password using
the numeric buttons on the Remote Control.
Procedure
While holding down the [Num] button, enter the Password by
pressing the numeric buttons.
When you enter the correct Password, projection begins.
Security Functions
48
