Epson EB-1830 User Manual Download Page 93

Page: 93 / 159

Mail is not received even if a problem occurs in the projector (EB-1925W/1920W/1915/1910/1830)

Check

Remedy

Standby Mode

set to

Communication On

To use the Mail Notification function when the projector is in standby, set

Communication On

Standby Mode

from the Configuration Menu.

Extended

Menu -

Standby Mode

p.58

Did a fatal abnormality occur and the projector come to a sudden
stop?

When the projector comes to a sudden stop, e-mail cannot be sent.
If the abnormal state continues, contact your local dealer or the nearest address provided in the Support and Service
Guide.

Quick Start Guide

Is power being supplied to the projector?

Check that your electrical outlet or power source is functioning correctly.

Is Mail Notification function set correctly in the Configuration
Menu?

Mail notification of problems is sent according to the

Mail

settings in the Configuration Menu. Check if it is set correctly.

If using EB-1925W/1915

p.69

If using EB-1920W/1910/1830

p.76

Problem Solving

Summary of Contents for EB-1830
































































































































































Search results

Summary of Contents for EB-1830

Reviews:

Epson EB-1830, User Manual, Page: 93 / 159

Search results

Summary of Contents for EB-1830

Reviews: