Epson Dreamio EH-TW450 User Manual Download

Page: 15 / 78

Selecting the Projection Quality (Selecting Color
Mode)

You  can  easily  obtain  the  optimum  image  quality  simply  by  selecting
the  setting  that  best  corresponds  to  your  surroundings  when  projecting.
The  brightness  of  the  image  varies  depending  on  the  mode  selected.

Mode

Application

Dynamic

Ideal for use in a bright room.

Living Room

Ideal for using the projector in a room with closed
curtains.

Theatre

Ideal for watching films in a dark room. Gives images
a natural tone.

Game

Ideal for playing games that involve speed in a bright
room.

Procedure

Remote Control

Each time you press the button, the Color Mode name is displayed on
the screen and the Color Mode changes.

If you press the button while the Color Mode name is displayed on the
screen, it changes to the next Color Mode.

The color mode can also be set using

Color Mode

in the

Image

menu from the Configuration Menu.

p.31

Functions for Enhancing Projection

Summary of Contents for Dreamio EH-TW450















































































Search results

Summary of Contents for Dreamio EH-TW450

Reviews:

Related manuals for Dreamio EH-TW450

Brands by name

Popular brands

Epson Dreamio EH-TW450, User Manual

Search results

Summary of Contents for Dreamio EH-TW450

Reviews:

Related manuals for Dreamio EH-TW450

Brands by name

Popular brands