64
Problem Solving
Reading Problem Mail Notification Function
When the Mail Notification function is set to On and a problem/warning occurs in the projector, the
following e-mail will be sent.
Subject: EPSON
Projector
Line 1:
The Projector Name where the problem has occurred
Line 2:
The IP Address set for the projector where the problem has occurred
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The following table shows the details that are
given in the message for each item. To deal with problems/warnings, see "Reading the Indicators".
p.54
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-) : A projector problem has been dealt with
Message
Cause
No-signal
No Signal
No Signal is input to the projector. Check the connection status
or check that the power for the signal source is turned on.
Internal error
Internal Error
Fan related error
Fan Error
Sensor error
Sensor Error
Auto Iris Error
Auto Iris Error
Cinema Filter Error
Cinema Filter Error
Power Err. (Ballast)
Power Err. (Ballast)
Lamp timer failure
Lamp Failure
Lamp out
Lamp Error
Lamp replacement notification
Replace Lamp
High Temp Warning
High Temp Warning
Lens Iris Warning
Lens Iris Warning
Cinema Filter Warn
Cinema Filter Warn.
Summary of Contents for dreamio EH-R2000
Page 1: ......
