Epson D-Jet 300, Installation And Configuration Manual

Page: 21 / 54

Software Configuration
DJet Setup
3
Installation Manual
– Configuration DJet Software
3-5
D
J
e
t
D
I7
4
6
7
1
8
-2
1
E
N
3.2.5 Setup Conversion
With the X and Y offset values the print is positioned
in the page.
Note
A Page Setup for the DJet system needs a paper
lead for the Front Page of +150mm in the Y axis (1).
The value of 150mm is mandatory.
Select the paper roll width here (2) .
Directory path and file name (3)
Parameter name Function
Offset X [mm] Moves the bitmap data in the X-axis (horizontal) on the page
Offset Y [mm] Moves the bitmap data in the Y-axis (vertical) on the page
Orientation ( F ) Turns the bitmap by 90, 180 and 270 degrees, including mirroring.
Page adjustment (left,
centre, right) Select the bitmap alignment to left, centre or right. The centre position is
recommended.
(control right of the orientation control “F”)
Scaling X [%] Scales the bitmap data in X-axis (print head direction)
Scaling Y [%] Scales the bitmap data in Y-axis (paper feed direction)
Parameter name Function
Path Page Setup Directory where the page setups are stored
Page Setup Page Setup name
Setup numeric ID Each Page Setup uses a unique ID. Choose for each one a number between 0 to
99
Button Save Stores the Page Setup settings
Button Open Opens an existing Page Setup