Epson ColorCopy Station 8200, Service Manual

Page: 14 / 83

EPSON Color Copy Station 8200 Revision A
Product Description Functions 9
o
Cable
Parts Number 202637400 (recommended)
1.3 Functions
1.3.1 Functions Overview
(*1) This function is not disclosed for end user at first, and not described in
the CCS 8200 manual. When the update is required after shipping, firmware
ROM file and the manual, in which the operation is described, will be
released.
14 PAO1 (key-matrix output) 39 LD2 (LCD Display data)
15 PAO2 (key-matrix output) 40 LD3 (LCD Display data)
16 PAO3 (key-matrix output) 41 LD4 (LCD Display data)
17 PAO4 (key-matrix output) 42 LD5 (LCD Display data)
18 PAO5 (key-matrix output) 43 LD6 (LCD Display data)
19 PAO6 (key-matrix output) 44 LD7 (LCD Display data)
20 PAO7 (key-matrix output) 45 GND
21 GND 46 GND
22 GND 47 ERROR (Error LED ON/OFF)
23 VCC (+5V) 48 READY (Ready LED ON/OFF)
24 VCC (+5V) 49 GND
25 VCC (+5V) 50 GND
Table 1-4. Connector Pin Alignment
Pin
number
Signal name
Pin
Number
Signal name
Table 1-5. The Main Functions
No. Function Name Description Target User
1 Local Copy
Copy function using directly
connected scanner and printer.
End user
2 Network TWAIN
Scanning function using network
TWAIN driver via network.
End User
3 WebStatus
Web-based utility to get the status
of scanner, printer, and CCS 8200.
End User
4 WebAdmin
Web-based utility to set the initial
parameters to CCS 8200 for
administrator.
End User or
Field supporter
5 WebUpgrade(*1)
Web-based utility to upgrade
CCS 8200 firmware via network.
End User
6
User
Configuration
Initial settings for network,
Language selection of message to
display on the control panel,
Retrieving factory settings.
End User
7
Functions for
Maintenance
Checking hardware board by board
to find hardware error in the
manufacturing stage or in the fields. Field supporter
or
Manufacturer
8
Temporary IP
setting
Starting with the fixed temporary IP
address in the manufacturing stage
or in the fields. Field supporter
or
Manufacturer
9
Firmware Update
by Board to Board
copy Copy from Master board to Target
board for CCS 8200 firmware
version-up.
Field supporter