
117
Related references
Supported Video Display Formats
Related tasks
Adjusting Picture Quality in Detail
Solutions When the Image is Flickering
If the projected screen flickers, try the following solutions:
• If the screen flickers only when a video signal is input, try replacing the cable connecting the projector
and video device.
• If
Light Output
is set to
Low (Eco)
, change this to
High
and try projecting an image for about two
hours to see if it still flickers.
• Disconnect all the cables connecting the projector and video devices, confirm no signal is being input,
and then reset all the projector settings by enabling the
Reset All Config
setting in the projector's
Reset
menu.
Parent topic:
Solving Image or Sound Problems
Related references
Image Quality Settings - Image Menu
Projector Reset Options - Reset Menu
Solutions When the Image Brightness or Colors are Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Try selecting a color mode that best fits the image and environment.
• Check your video source settings.
• Adjust the available settings on the Image menu for the current input source, such as
Brightness
,
Contrast
,
Tint
, and/or
Color Saturation
.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Position the projector close enough to the screen.
Parent topic:
Solving Image or Sound Problems
Related references
Summary of Contents for CO-W01
Page 1: ...CO W01 User s Guide ...
Page 2: ......
Page 8: ......
Page 22: ...22 Front Rear Front ceiling ...