Dot Screen
Dot Screen (popup menu)
You an change the grayscale technology setting using this feature.
If your printer supports the Phoenix MultiGray feature, set this
option to
MultiGray.
The
Standard
option sets the printer’s
grayscale handling to be the same as the standard PostScript
feature. The default value is
Printer’s default.
Renaming the Printer
If your EpsonScript printer is the only EpsonScript printer and no
other PostScript printer is connected to your AppleTalk network,
you may not need to rename the printer name.
When several EpsonScript or PostScript printers are connected to
your AppleTalk network, you should rename the printer name to
distinguish your printer from others.
To rename the printer, use the EpsonScript Utility according to the
steps below.
Running the EpsonScript Utility
1. Open your hard disk window.
2. Double click
EpsonScript Utility.
Note:
If you cannot find the EpsonScript Utility in your hard disk window,
perform the easy installation according to the steps in Chapter 1.
2-10
Setting Up Your Macintosh
