5. Make sure the name of the hard disk on you would like to install
the programs is shown below the message
“on the hard disk
named”
(where
HD-SCSI 0
appears in the example).
If the hard disk
name
is correct, go to step 7.
6. Click
Switch Disk.
Then one of other hard disk names is
displayed. Click
again
until you see the desired hard disk
name.
7. Click
Install
to perform the easy installation. The installer starts
copying the necessary files automatically.
8. Change the disk from
Printing Tools (Disk1
) to
Screen Fonts
(Disk2)
when the installer instructs you to do so. Installer
continues copying files automatically after you insert the next
disk.
Note:
You need to exchange the disks several times, as the messages
indicate.
9. Make sure the following message shows
on
your display.
Installation on the active startup disk
“HD-SCSI 0” was successful. You must
now restart your Macintosh to use your
new software.
10. Click
Restart.
You are
now
finished copying files from the
disk 3.
1-4
Installing the Programs
