40
Connection from the setting computer
Connect
the
computer
for
setting
to
the
TM
printer
by
the
wireless
LAN.
The
setting
of
the
wireless
LAN
of
the
setting
computer
is
set
for
the
Dynamic
Status
Sheet.
• Network
Mode
(Ad
‐
Hoc)
• SSID
(Ex:
EpsonNetIBSS)
• IP
Address
(Ex:
192.168.192.2)
(Don
ʹ
t
set
the
same
address
as
the
IP
Address
of
the
printer
to
the
setting
computer.
Example:
If
the
IP
Address
is
192.168.192.168,
the
IP
Address
of
the
setting
computer
should
be
set
to
another
number,
such
as
192.168.192.2.
The
same
address
(192.168.192.168)
cannot
be
used.)
• Channel
(Ex:
11
ch)
At
this
stage,
the
TM
printer
can
communicate
with
the
setting
computer.
Setting of the UB-R03
Set
up
the
UB
‐
R03
according
to
the
following
steps.
1
Boot the TMNet WinConfig V3 of the setting computer.
Selec
t
[All Pro
g
rams]-[EPSON TMNe
t
W
in
Co
n
f
ig
V3]-[TMNe
t
W
in
Co
n
f
ig
].
As for the setting method of the setting computer, refer to the manual of the computer
used.
When you set up a TM printer equipped with more than one wireless LAN interfaces, turn
on only one printer. If more than one printer is turned on at the same time, the TM printer
cannot be set up.
