6
|
Getting Started
Selecting Fiery Spark in the Chooser
Before you print, select
AdobePS
and
Fiery Spark
from the Chooser, then
close the Chooser.
For instructions on using
the Fiery Spark software, see
the
User Guide
on the Fiery
Spark CD-ROM.
Hardware Key Installation
After the software is installed, connect the hardware key to an available USB
port on the server computer.
Notices
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own
expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
designer.book Page 6 Wednesday, August 22, 2001 2:03 PM
